High Flow M1GC Series pp pleated filter cartridge replacement for water treatment

High Flow M1GC Series Filter Cartridges are made from depth fine PP or GF non-woven fabrics.The filter has a big diameter of 6 inch/152mm and no inner core, single open.The inside to outside flow pattern ensure that all the particles will be intercepted at the inside of the filter.The long service life and high flow rate result in low investment and less manpower in many applications.

Products Details

Product characteristics:
•  High filtration area, high flow rate.
•  With depth fine non-woven fabrics and scientific design, the filter has a good structure which has high dirt holding capacity, and result in long service life.
• 100% PP material makes the filter cartridge got excellent chemical compatibility. It is suitable for various liquid filtration.
Product specification:
Dimension: [Removal Rating]: 0.5um,1um,3um,5um,10um,20um,50um,75um,100um
[Length]:20"(508mm), 40"(1016mm), 60"(1524mm)
[OD]: Ø 165mm
Material of Constructions: [Media]: Polypropylene(PP)/Glass Fiber
[Drain layer]:China Non-Woven Fabric / USA Non-Woven Fabric
[End cap]: Polypropylene(PP)
[Gasket]: Silicone, EPDM, NBR, Viton
[Core]:  Polypropylene(PP)
Performance: [Max. Operating temperature]: 80℃
[Max. Operating DP]: 4.0Bar@21℃,2.4Bar@80℃.
Order Information
Series Number Romoval Rating Length CORE MEDIA SEAL OD
FWHFM1GC 0.5um=05 20"(508mm)=20 PP=P PP=P SILICONE=S 165mm
1um=1 40"(1016mm)=40 Glass Fiber=G EPDM=E
3um=3 60"(1524mm)=60 NBR=N
5um=5 VITON=V
For Example: FWHFM1GC-1-20-P-P-S
  With the continuous development of economy, environmental pollution, especially water pollution, has become an undeniable objective fact. Through the analysis of the current situation of urban water quality in China and the solutions to water pollution, it can be predicted that domestic water purifier, as an effective way to solve the problem of water pollution, has a huge potential market in China. With the development of water purification industry, various water purification products emerge in endlessly, and the filter cartridges used in various water purifiers are also diverse. Here we will briefly talk about various filter cartridges of water purifiers. PP cotton core: generally, it is only used for coarse filtration with low requirements to remove sediment, rust and other large particles in water. Activated carbon: it can eliminate the color and odor in the water, but it can not remove the bacteria in the water, and the removal effect of sediment and rust is also very poor. Ceramic filter cartridge: the minimum filtration accuracy is only 0.1 micron. Usually, the flow is small and it is not easy to clean. Filter wood ultrafiltration membrane filter cartridge: the filtration accuracy is 0.001-0.1 micron, which is one of the high and new technologies in the 21st century. It is a membrane separation technology using differential pressure, which can filter out rust, sediment, suspended solids, colloids, bacteria, macromolecular organics and other harmful substances in water, and retain some mineral elements beneficial to human body. It is the core component in the production process of mineral water and mountain spring water. The recovery rate of water in ultrafiltration process is more than 95%, and it can easily realize flushing and backwashing, which is not easy to block and has a relatively long service life. Ultrafiltration does not need to be powered and pressurized. It can be filtered only by tap water pressure. It has large flow and low cost. It is more suitable for the comprehensive purification of household drinking water. Therefore, in the future, the purification of drinking water will focus on ultrafiltration technology, combined with other filter materials, so as to achieve a wide treatment range and more comprehensively eliminate pollutants in water.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours