High Flow M1JK Series actual factory water filter cartridge in water treatment, best quality

High Flow M1JK Series Filter Cartridges are made from depth fine PP or GF non-woven fabrics.The filter has a big diameter of 6 inch/152mm and no inner core, single open.The inside to outside flow pattern ensure that all the particles will be intercepted at the inside of the filter.The long service life and high flow rate result in low investment and less manpower in many applications.

Products Details

Product characteristics:
•  High filtration area, high flow rate.
•  With depth fine non-woven fabrics and scientific design, the filter has a good structure which has high dirt holding capacity, and result in long service life.
• 100% PP material makes the filter cartridge got excellent chemical compatibility. It is suitable for various liquid filtration.
Product specification:
Dimension: [Removal Rating]: 0.5um,1um,3um,5um,10um,20um,50um,75um,100um
[Length]:20"(508mm), 40"(1016mm), 60"(1524mm)
[OD]: Ø 165mm
Material of Constructions: [Media]: Polypropylene(PP)/Glass Fiber
[Drain layer]:China Non-Woven Fabric / USA Non-Woven Fabric
[End cap]: Polypropylene(PP)
[Gasket]: Silicone, EPDM, NBR, Viton
[Core]:  Polypropylene(PP)
Performance: [Max. Operating temperature]: 80℃
[Max. Operating DP]: 4.0Bar@21℃,2.4Bar@80℃.
Order Information
Series Number Romoval Rating Length CORE MEDIA SEAL OD
FWHFM1JK 0.5um=05 20"(508mm)=20 PP=P PP=P SILICONE=S 165mm
1um=1 40"(1016mm)=40 Glass Fiber=G EPDM=E
3um=3 60"(1524mm)=60 NBR=N
5um=5 VITON=V
For Example: FWHFM1JK1-20-P-P-S
  It can be said that the water purifier is a must for many families now. The filter element is a very important component of the water purifier, which can effectively filter the impurities in the water. What signals will be sent if the filter element needs to be replaced? The manufacturer of large flow filter element will introduce it to you. 1. The water in the water purification mechanism becomes smaller Under the same conditions (such as the same water pressure and temperature), the water in the water purification mechanism becomes less. Then it is likely that the filter element is blocked. If the filter element of the water purifier is close to its service life, it is necessary to replace the filter element of the water purifier with a new one. 2. RO reverse osmosis water purifier water too fast When the water outlet of the water purifier is obviously accelerated, which is generally caused by the damage of the RO membrane. At this time, we must replace the RO membrane, otherwise the water purifier will completely lose its filtering function, which will bring adverse effects to the human body. 3. The taste of the outlet water of the water purifier becomes worse There are too many impurities in the filter element of tap water, which is caused by the accumulation of impurities in the filter element of tap water purifier for too long. A lot of dirt sticks around the ring mouth of the filter element, which also tells us that we need to replace the filter element. The manufacturer of large flow filter element tells us that if the filter element is not replaced in time, the purification effect will not be achieved at all. If the water purifier sends the above signals, the filter element must be replaced in time.

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours